Polycom Wireless Server 6000 Informações Técnicas descarregar pdf (Página 112)

KIRK Wireless Server 6000 Installation and Configuration Guide

12–10

• “General Configuration” on page 12-10

• “Base Station Configuration” on page 12-11

• “Security Configuration” on page 12-11

• “Sync. Ways Configuration” on page 12-11

General Configuration

On the General Configuration page you define IP and DNS settings for the

base station.

1 Click Configuration, and then click General.

Figure 12-10 Adm. Page Base Station: Configuration/General page

2 Click Use static IP address.

3 In the IP addr field, type the IP address of the base station.

4 In the Netmask field, type 255.255.255.0.

5 In the Gateway field, type IP address of the default gateway (optional).

The default gateway serves as an access point to another network.

Contact your system administrator for more information.

6 In the MTU field (Maximum Translation Unit), type the size of the largest

packet, that your network protocol can transmit (optional).

7 In the Domain field, type the domain name of the system (optional).

8 In the Server field (under DNS - Domain Name System), type the IP

address of the domain name

(optional).

9 Check the UPnP (Universal Plug and Play) if you want to enable the support

or to broadcast UPnP announcements.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 197 198

Sem comentários

Polycom Wireless Server 6000 Informações Técnicas Página 112