Polycom Wireless Server 6000 Informações Técnicas descarregar pdf (Página 111)

Configuring KIRK Base Station

12–9

Figure 12-9 Adm. Page WS:Administration/Base station page

4 In the RPN field (Radio Part Number), type the radio part number of the

base station.

The radio ID can be a number between 0 and 255. See your site planner.

Note: The default value of the RPN is equal to the base station number. It

is strongly recommended not to change this value.

5 It is possible to select Auto sync if you are deploying and want to find a

sync way for the first base station.

Note: Auto sync is only to be used in a deployment situation. When

selecting Auto sync, radio part numbers in the Primary sync. (RPN) field

and Secondary sync. (RPN) field are not taken into consideration.

6 In the Primary sync. (RPN) field, type the radio part number of the base

station, you want to synchronize on. See your site planner.

7 In the Secondary sync. (RPN) field, type the radio part number of the

base station, you want to synchronize on. See your site planner.

8 Click Save.

To check the sync state of the base station, refer to “Sync State of Base Station”

on page 15-29.

Configuring a KIRK Base Station Using Static IP Address

This section describes how to configure a base station using static IP address.

For information on accessing the web based Administration Page, refer to

“Accessing the Web Based Administration Page” on page 12-3.

This section contains information about:

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 197 198

Sem comentários

Polycom Wireless Server 6000 Informações Técnicas Página 111