Polycom V2IU Manual do Utilizador Página 36

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 82
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 35
User Guide V
2
IU 6400-S Converged Network Appliance
5 - 6
Configuring VoIP subnet routing
In its simplest configuration, the 6400-S acts as a proxy for a soft-switch or
H.323 gatekeeper on its immediate Provider subnet. Because these devices
reside on the same subnet as the 6400-S, packets proxied by the ALG function
do not require additional routing information.
The 6400-S can support a VoIP call-control server or H.323 gatekeeper on it's
Provider side but not located immediately on the Provider-side subnet by
configuring VoIP Subnet Routes.
Using the VoIP Subnet Routing feature, the 6400-S can be configured to serve
these remote devices. Three pieces of information are required for each subnet
containing the VoIP call-control server or H.323 gatekeeper:
The IP Network address.
The Netmask.
The Gateway.
You can configure up to 20 VoIP subnets.
To configure VoIP subnet routing:
1. In the navigation bar, select System.
SIP LAN side Gateway The SIP LAN Side Gateway is used to
configure a LAN side SIP gateway to
which calls that are not for a registered
phone can be sent. The name of the
gateway is a locally meaningful name.
These two fields must both be filled in, or
be empty.
Gateway Name The name of a subscriber PSTN gateway
or a single SIP proxy for multiple PSTN
gateways.
Gateway Address The IP address of a subscriber PSTN
gateway or a single SIP proxy for multiple
PSTN gateways.
Field Description
Vista de página 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 81 82

Comentários a estes Manuais

Sem comentários