Polycom Real-Time Media Conferencing Platform RMX 2000 Manual do Utilizador descarregar pdf (Página 39)

Polycom RMX 2000 Hardware Guide

1-33

5 Carefully slide the MPM/MPM+ card out through the front panel.

Installing the Replacement MPM/MPM+ Card

1 On the card to be installed, move the ejector levers to their fully open

position.

2 Slide in the replacement MPM/MPM+ card.

3 Push the MPM/MPM+ card firmly into the Backplane, making sure it

is properly seated in its slot.

4 Ensure that the metal ejector levers are fully retracted into their

housings.

5 Tighten the captive screws on the front panel of the RMX that secure

the MPM/MPM+ card to the chassis.

Installing a New MPM/MPM+ Card in a Powered On

RMX 2000

1 If applicable, loosen the captive screws and remove the slot cover.

2 On the card to be installed, move the ejector levers to their full open

position.

3 Insert the card into the slot until the ejector levers touch the front

edge of the card cage.

4 Push the ejector levers to their closed position and tighten the captive

screws on each side of the card, securing the MPM/MPM+ card to

the RMX.

1 2 ... 34 35 36 37 38 39 40 41 42

Sem comentários

Polycom Real-Time Media Conferencing Platform RMX 2000 Manual do Utilizador Página 39